Virginia-based Swood Cycles just released the first round of handmade light mounts for their T-Bar handlebar bag support. Find details on the new T-Bar Light Mount here…

If you haven’t seen it yet, the Swood T-Bar is a steerer tube mounted rack/bag support based on an original design by Tom Robinson of Hesson Labs (@hessonlabs) in the UK. Last spring, Stephen Wood at Swood Cycles took over US production as a workaround for shipping restrictions from the UK. The rack is handmade in Richmond, Virginia, constructed from stainless steel, and is rated for about 12 pounds.

For folks using the T-Bar and looking for a place to mount a front light, Swood just launched the new T-Bar Light Mount. It’s a stainless steel arm that mounts onto the horizontal bar of the T-Bar and provides a place for clamp-on front lights. At the lower end, there’s a 5mm hole for direct-mount dynamo lights and a 6mm hole for a Paul Components Gino mount for attaching standard handlebar-mounted lights.

Swood T Bar Light Mount
  • Swood T Bar Light Mount

The light mount attaches to the T-bar via a shaft collar that tightens around the T-bar with an included 7/64″ Allen key and can be mounted on either side. Currently, the light mounts are only offered in a raw stainless finish, but you’ll need to select what finish your T-bar has as the powder coating increases the diameter of the tubing.

The Swood T-Bar Light Mount costs $30 USD and is available now from

Related Content

Make sure to dig into these related articles for more info...



New Components

Please keep the conversation civil, constructive, and inclusive, or your comment will be removed.