Cedaero just launched a fresh handlebar bag and two accessories that can be used together as a complete handlebar bag system or with your existing handlebar bag. Learn about the new Cedaero Slingshot Pack, Briquette Spacers, and Grill Bumper here…

Following yesterday’s release of the updated Viewfinder V2 Pack, Minnesota’s Cedaero is back with three fresh products that can be used together as a system or paired with other bags. Learn all about the Slingshot Handlebar Pack, Briquette Handlebar Spacers, and Grill Bag Bumper below.

Cedaero Slingshot Handlebar Pack

The new Cedaero Slingshot is a larger, slightly more refined version of the Bar Hopper V2 bag. Instead of a zippered opening, the Slingshot uses a shock cord/flap closure that hooks around the rearward bolts on most threadless stems. A spring-steel batten runs along the top of the bag, where the Voile Nano straps loop through, providing structure and stability. On the inside, a mesh pocket and key hook help keep things organized, and there’s an extra length of daisy chain up front for dangling small items or attaching a light.

Cedaero Slingshot
  • Cedaero Slingshot
  • Cedaero Slingshot
  • Material: 1000D Cordura Nylon, RX30 X-pac, X11 X-Pac, or 15oz waxed canvas exterior
  • Liner: 200D Nylon
  • Dimensions: 10.25″ width x 5.75″ diameter (26cm x 14.6cm)
  • Capacity: 4.3 liters
  • Price: $119.95 USD
  • Manufacturer’s Details: Cedaero.com

Cedaero Briquette Handlebar Spacers

The Briquette Handlebar Spacers are TPU bag spacers designed to provide a little extra clearance between your handlebar and handlebar bag, while also managing messy cables. They are flexible enough to accommodate 22.2mm to 35mm bars, and there’s a split in one side that allows cables to run through the spacers. The Briquette Handlebar Spacers are designed for 9″ Nano Voile straps and pair well with Cedaero’s Slingshot, Bar Hopper V2, and Viewfinder V2 packs. They cost $40/pair and are made in the USA. Check them out here.

  • Cedaero Briquette
  • Cedaero Briquette

Cedaero Grill Bag Bumper

The Cedaero Grill Bag Bumper is a steerer-tube-mounted mini bag support designed to hold handlebar bags away from your bike’s headtube. Compatible with most packs sporting a vertical rear-facing daisy chain, the Grill Bag Bumper is designed to reach forward and provide a resting place 65mm (long) or 50mm (short) from the front of your steerer tube. They are made from powder-coated stainless steel, compatible with 1 1/8″ steerer tubes, and replace 2.25mm of spacers. Like the rest of Cedaero’s products, the Grill Bag Bumper is made in the USA. It’s available in black or yellow and costs $40. Grab yours here.

  • Cedaero grill bag bumper
  • Cedaero grill bag bumper

Further Reading

Make sure to dig into these related articles for more info...

FILED IN (CATEGORIES & TAGS)

Dispatch

New Bikepacking Gear

Please keep the conversation civil, constructive, and inclusive, or your comment will be removed.